Pullrite 331758 Quick Connect Capture Plate for Most Trailair Airbag/Shock King Pin Box Models
Pullrite

Pullrite 331758 Quick Connect Capture Plate for Most Trailair Airbag/Shock King Pin Box Models

SKU: L-337-331758
Shop on Walmart

We may earn referral compensation from qualifying purchases.

Help

If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, withing 24 hours on weekdays.

Customer service

All questions about your order, return and delivery must be sent to our customer service team by e-mail at yourstore@yourdomain.com

Sale & Press

If you are interested in selling our products, need more information about our brand or wish to make a collaboration, please contact us at press@yourdomain.com

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331758 fits Most Trailair Airbag/Shock Pin Box models.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16” less than 13 3/8".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 7 3/8".C: Measure from the rear edge to the leading edge of the king pin plate which should be 13 1/2".

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate’s wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331758 fits Most Trailair Airbag/Shock Pin Box models.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16” less than 13 3/8".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 7 3/8".C: Measure from the rear edge to the leading edge of the king pin plate which should be 13 1/2".

Recently viewed products